Rack mount for Mikrotik hEX PoE (Modular)3D Printed 1RU rack mount for the MikroTik hEX PoE Router (Product Code: RB960PGS). This is part of our ModMount Range, so you can mix and match your parts! This item is Omni directional, so you can use it on the left or right side. NOTE: You will need to pair this with another ModMount item (Like a Blanking Plate) to make a full 1RU Width, screws are included to join the parts. The Router slides into the frame from the front. This listing is just for

We have a seperate design for that in our ModMount range

3D Printed 1RU rack mount for 3x HiFiBerry Amp100's along with their Raspberry Pi

The Keystone Jack and Ethernet Flylead is available as an optional extra

5mm W/O Cable Arm) x 44mm  Rack Units required 1 Compatible Models Elite Mini 600 / 800 G9

NOTE: You will need to pair this with another ModMount item (Like 2 Blanking Plates) to make a full 2RU Width

The Time Capsule slides into the frame from the front

3D Printed 1RU rack mount for the Huawei HG8240 EchoLife ONT

NOTE: You will need to pair this with another ModMount item (Like some Blanking Plate) to make a full 1RU Width

There is also a Keystone socket on faceplate so you can pass the use a Keystone Jack (Not included) to re-route a port to the front

3D Printed rack mount that lets you mount 6x Sonos Ports neatly into a standard 19 Inch Rack taking only 3RU

) to make a full 1RU Width

Then slide your hEX S into place and install it in your rack