Airgas Single Stage Brass 0-250 psi Low Pressure Analytical Cylinder Regulator CGA-580This series of high purity, single stage regulators is designed for liquid cylinders, low pressure mixes, and process applications where precise pressure control is not required. These regulators are recommended for non corrosive analytical and process applications. This series is ideally suited for gas phase pressure regulation in liquid cylinder applications. The regulator body is machined from brass bar stock, which decreases internal volume and

and semiconductor processing

two-stage regulators is recommended for non-corrosive analytical and process applications where precise pressure control is required

The specially-designed

minimum droop and a leak-tight bonnet seal

allows the exterior surfaces to maintaina good appearance in outdoor environments

Nickel-Plated Bar Stock Body - provides long-lasting good looks

Each single-stage positive-seal regulator is designed with two 10 x 32 UNF-threaded body holes for bracket or panel mounting

where precise control and low flow rates are required

A preset safety relief valve makes these regulators suitable for use only with non-corrosive gases

calorimetric testing

stainless steel diaphragm with metal to metal seals provides good regulating performance and maximum purity integrity without the need for a soft seal

isolating contents from fire sources and limiting oxygen so spontaneous combustion risk is virtually eliminated