Materials obtained from End of Life Tyres. Determination of specific requirements for sampling and determination of moisture content using the oven-dry method1 Scope This Technical Specification specifies a method for determining the total moisture content of materials obtained from End of Life Tyres (ELT) by drying samples in an oven. The method is applicable to chips, granulates, powders and textile derived from the treatment of End of Life Tyres. This document is not intended for the determination of moisture content in steel wires.

the saffron pistil in Figure 4

as it becomes effective for the wearer in practical use in a relatively calm environment

The general information provided in BS EN ISO 14161 can have useful application for processes and biological indicators not currently addressed by existing standards

PD ISO/IEC TR 19795-3:2007 contains:

Program flowcharts

for determining the strength of WTORS anchorages for forward-facing wheelchairs ≤85 kg

followed by performance tests and performance checks throughout its service life

the guidelines of BS EN 62541-100 help you to enhance the interoperability between you and your clients

Where the gauge is used solely to confirm that there is sufficient ullage to accept delivery of a quantity of product into the tank or where the gauge is used solely to measure the liquid contents of the tank

The purpose of BS EN 3218-002 is to provide best industry requirements for rectangular connectors to ensure they are fit for the intended end-application use

Use of these alternatives will not affect the performance of this method

Emergency lighting - Part 2