J1939 Type II 'Y' Cable for CalAmp JPOD (CAN/CAN2)Contact for volume pricing or to place special orders 9 pin J1939 Type II connector 'Y' cable to HDSUB 15 pin dual row connector for CalAmp jPOD devices. The 'Y' cable has 2 parts including: 9 pin J1939 Type II passthru length of 0. 3 meters (or 1 foot), with all 9 connections populated 16 pin dual row length of 2 meters (or 6. 56 feet), with connections populated for Power, Ground, CAN, and CAN2 Equivalent cable for 5C994 2

with all 9 connections populated

IP67 rated connectors and cable configuration that allow Plug and Play connection

Cable is 1 meter in length with pins 1

The extension cable can be connected between 2 of the HTS-014 temperature probes to continue the chain

All 16 pins are connected between the 3 connectors

and the USB directly to the PC

16-pin blue OBDII connector 'Y' cable for Volvo/Mack to 15-pin HDSUB connector for CalAmp jPOD devices

Yellow - Connects to Purple of previous sensor in chain

The UART/TTL Serial Output Cable will work with all of our Wiegand output readers:

Convert input voltage from 10-30VDC down to the proper DC level to power the RFID reader

and has a total cable length of 1 foot

'Y' cable has 2 parts including 9-pin passthru 0