Go Power Transfer Switch 30 Amp Pre-wired - GP-TSWhat is a transfer switch? Most RV folks know that if you want to charge your RV's house battery, you need to plug into AC shore power. Right? Now if you add solar power to recharge your batteries when you're dry camping (off grid), DC energy flows from your panels via your charge controller into your battery bank. Then if you use an AC powered appliance or outlet, the DC power flows from our battery bank, through your inverter to your load. An

Peak Power (Pmpp) 50 W Cell Type: Polycrystalline Peak Power Voltage (Vmpp) 17

50-Foot Length: Provides extended reach for PV wiring in solar panel arrays

Diagram Ref Component Material Surface Treatment Quantity Dimensions 1-1 Fixed Bracket 5052 Aluminum Alloy N/A 1 160×53×56×3mm (6

The UPM 10X can hold four to ten solar panels depending on size:

Weight: 10

- Dual AC Inputs

and 8 AWG wire gauges

The controller maintains the life of the battery by protecting it from overcharging

Specification Detail Wire Gauge 2/0 AWG Length 36 inches (3 feet) Wire Insulation Black Heat Shrink Color White Terminals 3/8" crimped lugs (both ends) Polarity Identification Grounded or identified DC conductor Applications Inverter connections

thanks to its generous dimensioning and multiple hole orientations

- LED Indications: Four LED's for Bulk

7 kg) Wire Gauge 14-10 AWG copper