35 Degree DC Water Heating Element ThermostatWater Overheat and Freeze Thermostats for DC Water Heating Use these thermostats with our DC water heating elements if you need to regulate the temperature of the liquid you are heating. Our 35 degree F freeze thermostat keeps water and other liquids from freezing. It turns the element on before the liquid freezes at 35 degrees F (closes the circuit) and turns it off (opens the circuit) when the liquid's temperature reaches 55 degrees F. Therefore,

Please note: This controller is not compatible with lithium batteries

you MUST coat all metal surfaces to prevent the disaster of corrosion

This board will allow for up to 3 strings of 250 volt PV power to be combined and sent to the MidNite Classic 250 charge controller for up to 79 amps of battery charging capability

Using a Water Heating Element as a Dump/Divert Load:

The MultiPlus-II 2 x120V is the perfect one-box mobile solution for standard North American 50A 120/240VAC split-phase applications

One box houses a MidNite 100 amp double pole breaker on the battery side of the controller for safety that also serves as a convenient disconnect

The Classic SL-200 has a graphics panel and ground fault but no arc fault or Ethernet capabilities

Our Battery Saver Smart AC Shutoff Module keeps more energy in your lead acid or lithium batteries by automatically shutting down some or all of the AC loads while allowing you to keep on some important or critical loads

Fan Cooled Condenser (Fast Cool Down)

cooling or thermal regulation required

3 sets of 3 foot solar PV cable extensions pre-wired with MC4 connectors

7 volts (24 volt battery bank) @ 62 amps