Wishbone Insert for TurnbuckleHyper Racing # 95 1075 Welds into 1" x . 065" wall tubing. Has 3 4" 16 internal threads to mate with the 95 1072 Turnbuckle. Use this insert if you are making your own wishbones. Inserts are machined from cold rolled steel.

Lowering the top link on the bearing carrier and leaving the point on the car the same

Hyper Racing # 146-264-2

36-105TI for use with a 1/2" or 3/8" rotors and the 36-1051TI for use with 1/4" or 3/16" rotors

New design: 1/2" thick with 5/16-18 pinch bolt (602-107)

Hyper Racing # 39-006

It also depends on which Jacob's Ladder frame tab hole the paddle is mounted to

Hyper Racing # 656-210

You will need to add another 5/16-18 stud to the Power Steering housing as this clamp has tight clearance to fit the mounting screws

Increase traction

Hyper Racing # 389-203

4" bolt circle diameter

Pre-mixed to save you time