Chain Feeder Timeclock c/w 10 amp Overload for 1 motorTraditionally track feeder controls consisted of a twin dial clock, the 24 hour outer dial and a 60 minute inner dial. Although these clocks were the most popular choice unfortunately they are no longer available. Most operators are reluctant to use a digital time clock for track feeder systems due to complication of use and the ability to simply see when the next feed is due. We have had a lot of experience using time clocks for various applications

3-IN-ONE professional White Lithium Grease minimizes friction while guarding against rust and corrosion

Reusable mask for use over more than one shift

2mm Inside Diameter

Pack of 25

Dewpoint Pro

for protection of 3-phase motors 1

Charging energy 0

Effective in the presence of organic matter

A 3 phase motor which we use to mount directly onto our Auger Gearbox which has a dry joint

Width: 75mm | 3"

Easy to calibrate

The Redtop should be placed about 10m (30ft) away from the area that you want to protect