End mill holder Whistle-Notch HSK 100 - 32 - 120Application: For mounting straight shank tools and inclined flat according to DIN 1835 form E (Whistle Notch). Delivery: With clamping screw and axial adjustment bolt All holders are made of forged steel Specific, low warpage hardened Surface hardened HRC 58~60 Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080 Surface roughness Ra < 0,4 m Tensile strength in the core of min. 800 N mm after DIN All functional surfaces fine

For mounting straight-shank tools in collets

Hardening depth 0

In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

critical factors for successful deep face grooving operations

break-proof and impact-resistant ABS plastic

Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

For mounting tools with straight shanks

clamping depth l2 = max

With adjustable spray nozzle and shim

without cooling lubricant supply

- Higher repeat-accuracy

For cleaning internal tapers on machine spindles